Stilliloki AKH


  • Vörunúmer: ATAKH
    Tegund: AKH
    Heiti: Stilliloki AKH
  • AKH • Airtight control valves
    Startup form / Actuator mounting instruction
    Circular air-tight control valve according to DIN EN 1751-4 with manual quadrant and rubber sealing.
  • Material
    Galvanized steel
  • Accessories
    Controle valve type AKH can be motorized with a actuator type LM, NM, LF or NF/SF
    If used with servomotor type LM, a mounting plate type MP-LM is obligatory. An axe extension type AEX-12/M6 100 mm is necessary for AKH 80 until AKH 250
    If used with servomotor type NM, a mounting plate type MP-NM is obligatory. An axe extension type AEX-12/M6 100 mm is necessary for AKH 80 until AKH 250
    If used with servomotor type LF, a mounting plate type MP-LF is obligatory. An axe extension type AEX-12/M6 100 mm is necessary for AKH 80 until AKH 250
    If used with servomotor type NF or SF, a mounting plate type MP-NF/SF is obligatory. An axe extension type AEX-12/M6 100 mm is necessary for AKH 80 until AKH 250
    An actuator with more than 5Nm (NM, NF or SF) is recommended for AKH size 280 to 630
    From AKH diameter 280 the valve is already equipped with an axle extension so no extension will be needed.
  • Text for tender
    A circular air-tight control valve with manual quadrant is used for a good regulation of the air flow. The valve can be motorized with actuator type Belimo LM or NM. The manual handle will be replaced by mounting plate Type MP-LM or MP-NM. An Axle extention AEX-12/M6 100mm is recommended.
    Type ATC AKH
  • Order example
    AKH, 250
  • Explanation :
    AKH = Type of valve
    250 = Diameter of valve
  • Other available products
    Version ATEX available upon request

Download


Mounting instruction
Download

Stilliloki AKH