Upphengja OBMC


  • Vörunúmer: ATOBMC
    Tegund: OMBC
    Nafn: Röraupphengja
  • Application
    Used for suspension of circular ducts
    Clamps OBMC are especially designed for vibration attenuation
    Dia 80 up to 400 mm with screw M6 on either side, 1-point suspension with M8/M10 nut on top
    Dia 450 up to 1000 mm with 2-point suspension with M10 hole on either side
  • Composition
    Made of hot dipped sendzimir zinc plated steel
    Maximum suspended weight: 500 kg
    Width is 20 mm for Dia 80 – 400 mm and 25 mm above Dia 400 mm
    Thickness is 1.8 mm under Dia 400 mm and 2.3 mm above Dia 400 mm
    Rubber inlay:
    Working temperature:
    -40°C + 120°C
    Material hardness: HS 60° +/-3°
  • Accessories
    Threaded rods type THA (not included)
    Other available products
    Suspension clamps without rubber inlay type OBDC
  • Order example
    OBMC, 250
    Explanation :
    OBMC = Clamp type
    250 = Diameter of clamp
  • Text for tender
    The circular ducts shall be suspended by means of sendzimir zinc plated steel clamps with rubber inlay. They shall tolerate a maximum suspended weight of 500 kg. The ducts shall be suspended on two points by means of threaded rods on either side of the clamp
    ATC type OBMC

Download

Upphengja OBMC